Frequently Asked Roofing Questions, Long Island

Yes, every estimate starts with a free on-site or online review and comes back to the homeowner in writing. There is no charge for the visit and no obligation to book the work afterward.

The review covers the roof surface, flashing, and any visible interior signs of a leak, and the homeowner receives a written summary with photos. If the honest answer is a repair rather than a full replacement, that's what gets recommended.

Yes, material selection is part of every estimate, not a separate consultation. Roof shape, architectural style, budget, and how exposed the home is to wind and salt air all factor into whether metal, copper, cedar, or EPDM is the better fit.

A steep-pitched craftsman home often suits cedar shake, while a low-slope addition needs EPDM or PVC regardless of what the rest of the house uses. Metal and copper get recommended where wind exposure or a premium look matters most, not as a default upsell.

That depends entirely on the roof's condition, and the inspection is built to answer that question honestly rather than default to the bigger job. A roof with isolated flashing failure or a single damaged section is usually a repair candidate; widespread granule loss, multiple leak points, or a roof already past its expected lifespan usually points to replacement.

Every inspection includes photos and a plain-language explanation of which category the roof falls into, so the homeowner isn't just taking someone's word for it.

Being home for the initial estimate visit is recommended, since that's when material options and the repair-versus-replacement finding get discussed directly. Once a project is underway, homeowners don't need to be present for the full workday but should be reachable by phone.

Owner Daniel Ulloa has worked in roofing and exteriors for more than 20 years, and Atlantic Roofing carries that experience forward across metal, copper, cedar, and EPDM roofing systems.

That background spans nor'easters, hurricanes, and the full range of Long Island's coastal weather, which shapes how every roof gets specified and installed.

The specialty is metal and copper. Alongside that we install and repair asphalt shingle, cedar shake, and EPDM/PVC flat roofing — asphalt shingle is the most common roof we install, and metal and copper are what we're known for.

For most Suffolk County homes near the water, a metal roof outlasts asphalt and holds up better in high wind, often making it the lower total cost over a roof's full lifespan even though it costs more upfront. Cedar and EPDM remain the right call for specific roof shapes, architectural styles, and budgets.

A steep, dormer-heavy roofline suited to a craftsman look often does better in cedar shake, while a flat addition roof needs EPDM or PVC no matter what material covers the rest of the house. That comparison happens as part of every free consultation, based on the actual roof, not a generic pitch toward one material.

Metal roof pricing on Long Island typically runs higher per square foot than asphalt, with the exact number depending on roof size, pitch, panel profile, and how much flashing and trim detail the roofline requires. A simple gable roof costs less per square foot than one with multiple valleys, dormers, or a steep pitch.

Because the range is wide, Atlantic Roofing provides an exact written number after the on-site or online review rather than a blanket price, so the homeowner is quoting their actual roof.

Copper roofing costs more than metal or asphalt per square foot, reflecting both material cost and the specialized labor copper flashing and seaming require. Most copper work on Long Island covers bays, porticos, and accent sections rather than a full roof, which keeps the total project cost more manageable than a full copper install.

An exact figure depends on the scope, whether it's a full copper roof or an accent section, and the complexity of the flashing detail involved. That gets scoped and priced during the estimate.

Yes. Every job carries a 2-year labor warranty on the workmanship itself, put in writing before the project starts rather than left in fine print discovered later.

Materials vary from job to job, so anything covering the material specifically gets walked through during the estimate for the exact products going on your roof. Ask during the visit and you'll get a straight answer for your project rather than a general claim.

Atlantic Roofing accepts cash, check, and online payment. Payment terms, including any deposit required to schedule the work, are laid out clearly in the written estimate before the project is approved.

Roof size, pitch, material choice, the amount of flashing and trim detail, and whether tear-off reveals additional deck or structural repair all factor into the final price. A roof with several valleys and dormers costs more to install than a simple gable, regardless of material.

Because those variables differ on every home, Atlantic Roofing avoids quoting a number before seeing the roof. Every written estimate reflects the actual scope, not a starting-at figure that changes once work begins.

Many homeowners insurance policies cover roof damage caused by wind or a fallen tree from a storm event, though coverage details and deductibles vary by policy and insurer. Atlantic Roofing documents storm damage with photos that homeowners can use when filing a claim.

Not every roof issue qualifies as storm damage under a given policy, and normal wear or age-related deterioration typically isn't covered. A clear, photographed inspection helps establish which category the damage actually falls into before a claim is filed.

Atlantic Roofing serves Suffolk County from its East Patchogue base. The core service area covers Patchogue, East Patchogue, Bay Shore, Sayville, Blue Point, Medford, Holbrook, and Ronkonkoma.

Jobs outside that cluster are considered case by case, depending on scope and crew availability. Homeowners outside the listed towns are welcome to call and check.

Most repairs finish in a single visit. A full roof replacement typically takes one to a few days depending on size, roof complexity, and weather, with specialty work like a full copper install or a steep, dormer-heavy roofline running longer.

The exact timeline is confirmed once the scope is known, during the written estimate, and any weather-related delay is communicated as it happens.

Yes, an Equipter 4000 Series machine contains and removes debris throughout the job, and the crew inspects and cleans the site when the work is finished. Nails, shingle scraps, and packaging materials don't get left behind for the homeowner to deal with.

Yes, Atlantic Roofing installs siding, PVC trim, and seamless gutters, usually paired with a roofing project. These are typically bundled with roofing work rather than sold as standalone services.

See the Siding & PVC Trim and Gutters pages for more detail.

Yes, general contractors and builders are a real, repeat part of Atlantic Roofing's work. Projects get a dedicated point of contact, a firm start date in writing, and access to copper and standing-seam detail work that a typical roofing sub can't handle.

Full detail on that partnership is on the About page.

Yes, Atlantic Roofing is fully licensed and insured in New York State. Proof of licensing and insurance is available on request before work begins, and homeowners are encouraged to ask for it.